Lighting is everything when it comes to decorating your home. Your house’s total look and feel depends on lighting. You can completely change your home experience by dimming or brightening the lights. If you want to study, you need a bright area in the house, and if you’re going to hang around with your folks, soft light will do the work. If it goes bad, then how to reset GE dimmer dial light switch? Factory reset, use digital multimeter to check its power, and other ways.
However, not everyone has a big house, so people often use the same room for multiple purposes. Different uses of that multi-purpose room require different lighting. This is where a dimmer switch comes in handy. You can adjust lights from dim to bright levels just by sliding a lever or rolling a knob of a dimmer switch. Now, the arrival of smart dimmers in the market has made the task even easier. No neutral wire is required, and it has Bluetooth, WiFi facilities, and voice control. No hub is required. You can also connect these smart dimmer switches to Google Home and Amazon Alexa devices.
The GE Smart Light Dimmer Switch will let you effortlessly adjust the brightness levels of your lights. However, there may come a time when you feel like you need to factory reset GE dimmer dial light switches due to connectivity issues or switch reconfiguration.
Here we will guide you through how to reset different GE dimmer dial light switches, both hardwired and wireless models:
What is Dimmer Light Switch?
A Dimmer Light Switch is a type of digital switch. It allows to adjust the brightness of a light fixture without turning it on and off. Dimmer light switch easily complete or break the electrical circuit. This switches regulate the amount of voltage that is sent to the light fixture, and control how bright or dim the light appears. However, there are different type of dimmer light switches such as
- Rotary dimmer
- Touch dimmer
- Slide dimmer
- Smart dimmer
Why do the people need to use this type of light? There are some essential reasons like Creates mood lighting and ambiance, reduces energy consumption by using less power, extends the lifespan of bulbs by operating them at lower brightness levels, etc. So, choose the best smart light switch with dimmer and get aesthetic room ambiance.
Resetting a GE Dimmer Dial Light Switch (Hardwired)
If your GE Z-Wave Dimmer Dial Light Switch isn’t responding or needs to be repaired, follow these steps to reset it completely using Z-Wave Exclusion.
Option 1: Factory Reset (Without a Hub)
If you don’t have access to a Z-Wave hub, you can manually reset the dimmer to factory settings.
Steps for Factory Reset
- Press and hold the top (on) button of the dimmer switch.
- While holding the top button, press the bottom (off) button 3 times quickly.
- Release the top button.
- The dimmer should flash or blink to indicate it has been reset.
Warning: This action removes all Z-Wave network settings, and you will need to re-add the device to your hub if you want to use it with a smart home system.
Option 2: Z-Wave Exclusion (Using a Hub – Recommended)
If the dimmer switch is still linked to a previous smart hub (e.g., Iris, SmartThings, Wink, or Hubitat), you need to remove it before pairing it again in ge z-wave switch pairing mode.
Now, Put Your Z-Wave Hub into Exclusion Mode
- Hubitat: Go to Devices > Z-Wave Details > Start Z-Wave Exclusion.
- SmartThings: Open the SmartThings app, select the hub, and tap Remove/Exclude Device.
Trigger The Exclusion Process On the Dimmer Switch
- Quickly press the up (on) button 3 times in a row.
- The hub should confirm the device was removed (e.g., “Unknown device excluded” message).
Re-pair the dimmer with your hub
- Put your hub into Z-Wave Inclusion Mode (Add Device).
- Press the up (on) button once to begin pairing.
- The hub should detect the switch within a few seconds.
- Test the switch: Ensure it responds properly to dimming and on/off commands.
Resetting a GE Dimmer Dial Light Switch (Wireless)
Resetting a wireless GE switch depends on the model and communication type (Z-Wave, Zigbee, Bluetooth, or Wi-Fi). Below are reset instructions for each type:
1. GE Enbrighten Z-Wave Smart Remote Switch (Battery-Powered)
These wireless add-on switches act as secondary controls for a main Z-Wave dimmer/switch.
Reset Steps:
- Press and hold the top (ON) button for 10 seconds.
- Release when the LED indicator flashes once.
- The switch is now reset and ready to pair again.
Note: This does not remove the primary switch from your Z-Wave hub—only the wireless add-on switch.
2. GE Enbrighten Zigbee Smart Remote Switch
If your Zigbee switch isn’t working correctly, you can reset it as follows:
Reset Steps:
- Press and hold the top (ON) button for 10 seconds.
- The LED will start blinking rapidly—release the button.
- The switch is now reset and must be re-paired to your Zigbee hub.
3. GE Cync Wire-Free Dimmer Switch (Bluetooth)
This switch works with GE’s Cync Smart Bulbs via Bluetooth.
Reset Steps:
- Press and hold both the top (ON) and bottom (OFF) buttons together for 10 seconds.
- The LED should flash, indicating a successful reset.
- Re-pair it using the Cync app.
4. GE Cync Smart Dimmer Switch, No Neutral Wire Required (Wi-Fi)
GE Cync Smart Dimmer Switch connects via Wi-Fi and controls Cync smart bulbs.
Reset Steps:
- Press and hold the ON and OFF buttons together for 10–15 seconds.
- The LED light should start flashing—release the buttons.
- Open the Cync app, remove the device, and re-add it.
5. UltraPro Z-Wave Switch
UltraPro Z-Wave switches are essentially rebranded GE Enbrighten models, so they follow the same reset process.
Option 1: Factory Reset (Without a Hub)
Use this method if you need to completely reset the switch and remove it from any previous Z-Wave network.
Steps:
- Press and hold the top (ON) button.
- While holding the ON button, press the bottom (OFF) button 3 times quickly.
- Release the ON button.
- The LED indicator should flash, signaling a successful reset.
Warning: This erases all Z-Wave settings, and the switch must be re-added to a hub.
Option 2: Z-Wave Exclusion (Recommended for Re-Pairing)
Use this method if the switch is still linked to an old smart home hub and needs to be removed before re-adding.
Steps:
Put your Z-Wave hub into Exclusion Mode:
- Hubitat: Go to Devices > Z-Wave Details > Start Z-Wave Exclusion.
- SmartThings: Open the app, select the hub, and tap Remove Device.
- Home Assistant / Z-Wave JS: Navigate to Z-Wave Settings > Remove Device.
- Press the top (ON) button of the switch 3 times quickly.
- The hub should confirm that the device was removed.
After exclusion, re-add the switch using the hub’s “Add Z-Wave Device” function.
Troubleshooting Tips:
- If the switch isn’t resetting, remove the batteries, wait 1 minute, and try again.
- Some models may require multiple reset attempts before they fully reset.
- Always remove and re-add the switch to your smart home hub after a reset.
What to do if GE Z-Wave Switch Not Working Manually?
If your GE Z-Wave switch isn’t working manually (not responding to physical button presses), follow these troubleshooting steps:
1. Check Power & Wiring
Make sure the breaker is on the switch might not be receiving power. Test the line voltage using a multimeter to check that power is reaching the switch.
Verify wiring connections – Ensure:
- Line (hot) wire is connected properly.
- Load wire goes to the light fixture.
- Neutral wire (if required) is securely connected.
- Ground wire is attached.
If this is a 3-way setup (two switches controlling one light), ensure the traveler wire is correctly installed.
2. Check If the Air Gap Switch Is Pulled Out
GE/Jasco Z-Wave switches have an air gap tab (a small pull-out switch at the bottom). If it’s pulled out, the switch is disconnected from power so, push it back in to restore functionality.
3. Perform a Factory Reset
If the wiring is correct and power is reaching the switch, try resetting it.
Reset Steps:
- Press and hold the ON button.
- While holding ON, press the OFF button 3 times quickly.
- Release the ON button.
- The LED indicator should flash, confirming the reset.
4. Test with Z-Wave Hub
Even if the switch doesn’t work manually, it may still respond to Z-Wave commands. Try turning it ON/OFF through your hub (Hubitat, SmartThings, Home Assistant, etc.). If it works through Z-Wave but not manually, the physical button mechanism may be faulty.
5. Replace the Switch If Necessary
If the switch still doesn’t work after:
- Confirming power & wiring
- Checking the air gap
- Resetting the switch
Then it may be defective and need replacing.
Can You Use Led Light Bulbs with A Dimmer Switch?
Of course, you can use LED light bulbs with a dimmer switch. In that case, you remember one thing if both the dimmer switch and the LED bulbs are compatible with each other, then you can only use at that time otherwise you must avoid. Here’s what you need to know:
Final Thoughts
Whenever your dimmer switch glitches, the best way to solve it is by resetting it. A simple factory reset can resolve connection issues and reconfigure the entire system. Resetting a dimmer switch can make it ready for use again. Whether it’s a hardwired dimmer switch or a wireless one, following the correct reset procedure can ensure the best performance from your switch. Always remember to remove and re-pair your switch to the smart home hub after a reset to restore full functionality. If the issues persist, you can check the user manual or contact GE Customer Support for additional assistance. If you enjoyed reading this far, stay tuned to OPEN READ for more on smart home components.